Recloser Test Equipment
Verify the proper operation of automatic circuit reclosers using simulated fault conditions. These systems provide a variable high current output, a computer-controlled impedance compensation circuit, and the instrumentation required to efficiently test nearly all single or three phase direct acting reclosers and sectionalizers. They can also be used for primary injection testing of electronically controlled reclosers.
Simple operation with computer-based controls and WINRCL software provides automation of testing procedures, storage of test data, and test report generation.
Both models will perform the following three
main tests, display and record the results.
Microhmmeter-Contact Resistance Meters
The MRM Series will accurately measure very low contact resistances on all types of electrical products including switches and circuit breaker contacts, transformer and motor windings, wire and cable samples, joints in busbars, or any application where low resistance current is required.
15-200 kV Field and Lab AC Dielectric Test Sets
The 6CP line is a complete test system in a mobile package, simple to set-up and operate, lightweight and ruggedly constructed. The 6CP line consists of a combination control and regulator enclosure and separate high voltage section.
|6CP30/15-3||≈0-15 kV, 200 mA & ≈0-30 kV, 100 mA|
|6CP50/10-3||≈0-10 kV, 300 mA & ≈0-50 kV, 60 mA|
|6CP100/50-7.5||≈0-50 kV, 150 mA & ≈0-100 kV, 75 mA|
|6CP120/60-7.5||≈0-60 kV, 125 mA & ≈0-120 kV, 62.5 mA|
|6CP100/50-10||≈0-50 kV, 200 mA & ≈0-100 kV, 100 mA|
|6CP120/60-10||≈0-60 kV, 166 mA & ≈0-120 kV, 83 mA|
|6CP200/100-10||≈0-100 kV, 100 mA & ≈0-200 kV, 50 mA|